Grade 12 Limestone Base, DOT approved or Non-DOT approved.

Low Plasticity material for foundations and fill. Used for raising elevations or replacing high clay soils.

We offer many types of general fill to fill in a hole or raise your site. This is usually your most cost-effective option.

Pit run or possibly crushed caliche can also be used on many energy projects, ranch roads, or pad sites.

Low plasticity material for foundations and fill. Used for raising elevations or replacing high clay soils.

Depending on pit location this can range from a sandy loam, rich black dirt, desert topsoil, and screened enriched soils.

3/8" River Rock used for ready mix grouts, utility installation, fuel tank installations, and filter stone.

Can be used for ready-mix aggregate, landscape rock, and drainage applications.

Often used for construction entrances, erosion abatement, and a subbase in very wet conditions.

1" clean crushed hardrock material. Used for topping rock, drainage rock, and decorative stone. When hard enough it can be used for ready mix applications.

An alternate material that is State approved in many cases. In areas where there is limited natural stone this is often a viable alternative. It also qualifies for LEED certification.

1x3 smooth river rock used as drainage rock, for landscaping, and decorative applications.

A terrific topping for parking lots, ranch roads, campgrounds, and more. Offers a dust free environment and handles rain well.

A course sand that is used in the production of ready-mix. Can also be used under bulk storage tanks.

Used in utility work this is a combination of sand and Portland cement, this stabilizes backfill and manholes. Can also be used under paving.

Armor Stone to Gabion baskets different sized large rocks (18 – 24”) used for erosion control and shoreline stabilization.

When the material on your site doesn’t balance and you need to get rid of the extra, we will haul it away and find a home for it if necessary.